24,000 BTU/HR Rating:

RAC 2900 = RE-29 Low profile 30,000 BTU/Hr Evaporator tied into factory dash a/c system supplied by chassis manufacturer. Designed to be used in cut-a-way buses and/or raised roof van type vehicles. Installer Note: System requires (1) IK-006 tie-in kit. System designed for use in cut-a-way type buses.

RAC 1000 = RE-10 36,000 BTU/HR Rear Evaporator tied into dash a/c system supplied by chassis manufacturer. Installer Note: System requires IK-006 tie-in kit. System designed for cut-a-way type buses.

RAC 1010 = RE-10, 36,000 BTU/HR Rear Evaporator w/RC-10, 36,000 BTU/HR Skirt Mounted Condenser, w/ (1) 12" fan. This is a stand alone type system. Installer Note: System requires (1) standard automotive type compressor, a compressor mounting bracket, and compressor fitting kit, and an IK-001 installation kit.

Dash A/C System: In the event the chassis is not equipped with dash a/c, RAC Systems can supply one. Installer Note: When ordering a dash a/c systems please make sure you order the compressor, compressor mount bracket, and compressor fitting kit to match.

CUT-A-WAY IN-DASH A/C Units:
Ford In-Dash
GM In Dash