Rated Capacity: 58,200 BTU/ Heat
20,700 BTU /Cool
Mounting Location: In -Dash For Blue Bird FC Buses
Description: In Dash Heat/Cool Unit For Blue Bird Forward Control Powered Buses (i.e., Trans Shuttle/TC 2000)
Standard Design Features
- Advanced Rifled Tube Coil Technology for 100% Evaporation
- 2 Year Unlimited Mileage Warranty
- 5 Year Exclusive Coil Warranty
- All RAC Systems Operate On R-134A Environmentally Friendly Refrigerant
- Special Center Mount Air Duct With Adjustable Louver
*Warranty Offerings Subject to Common Industry Terms, Conditions and Limitations.
Heat Exchanger Coil: High efficiency, high Performance internally grooved Rifled Tube Copper design in a/c coil. Smooth Tube coil in heat side.
Three Tube Rows For A/C, 20,700 BTU/hr & 50.69 heat transfer surface area. 58,200 BTU.hr heat w/two row coil. The total surface area is 101.38 ft
Filter System: Cleanable Aluminum Mesh Type
Cover: Blue Bird Dash Heater compartment
Construction: Lightweight Rust resistant aircraft aluminum, drain pan galvanized steel.
Evaporator Blower: System utilizes existing Blue Bird Heavy Duty 3 Speed Bird Blower Motor = 600 CFM's.
DC Current Draw: Estimated Blue Bird Motor = 12 Amps @ 13.5 volts
Low Pressure Switch: Mounted in evaporator
*Note: All RAC Systems Product Information And Specifications Data Presented Herein Subject To Change Without Notice.
ABOUT RIFLED TUBE COIL TECHNOLOGY
Rifled Air Conditioning Systems introduced enhanced rifled coil technology to the bus industry. The internal rifled grooving of our coils increase the surface area as much as 50% over that of smooth copper coils for a more efficient transfer of heat. As a result of the success of this industry improvement, our competitors have also begun to offer enhanced heat exchanger coils. Let the buyer beware as there are many different types of enchanced coils being offered. Some of these coils were even designed for home cooling and not for use in buses. In order to get the best results it is important that you specify the most effective coils for the bus industry = Rifled Tube Coils.
Product Note: This Evaporator is one of the many components manufactured by RAC Systems. To complete a bus air conditioning system, with the goal of maximum performance and reliability, it is important to do so with vehicle size, passenger capacity, and climate conditions in mind. For initial help selecting a system, please use the A/C Wizard . For futher in depth information, please contact your local RAC Master Warehouse Distributor. These authorized installers can customize a system for you that offers the best combination of components (i.e., condensers & evaporators), compressors, and available engine mounting brackets to meet your needs. RAC can be contacted directly at 1-800-784-5627.
