 EVAPORATOR MODEL: RE-29 RATED CAPACITY: 30,000 BTU/HR 600 CFM MOUNTING LOCATION: Rear Mount SPECIAL FEATURES: Low Profile OPTIONAL LOCATIONS: [ ] Side Mount Free Blow DESCRIPTION: Low Profile Evaporator Ideally Matched with RC-29 Skirt Mounted Condenser = 2929 System . Can also be driven off O.E.M Condenser. Designed for small raised roof type vans and for larger buses where headroom is a consideration (i.e., Driver’s area). Standard Design Features
- Advanced Rifled Tube Coil Technology for 100% Evaporation
- Rust Resistant, Light Weight Aluminum Construction
- 2 Year Unlimited Mileage Warranty
- 5 Year
Exclusive Coil Warranty
- Balanced Blower Motors For Quiet Operation
- 13.5 DC rated Component
- High Volume, Widely Dispersed Air-Flow with Special Down Force Channels
- Integral Air Return Grille In Cover
* Warranty Offerings Subject To Common Industry Terms, Conditions and Limitations. Technical Specification Data RE-29 Low Profile Evaporator 30,000 BTU/HR Evaporator Component Specifications: Heat Exchanger Cooling Coil: High efficiency, High Performance Internally grooved Rifled Tube copper design. Four tube rows, 54.42 ft. heat transfer surface 30,000 BTU/HR rated. Filter System: Cleanable Aluminum Mesh Type. Cover: Impact Resistant H.D. ABS Gray Plastic, Optional Colors Available On Special Order. Construction: Lightweight Rust-resistant aircraft aluminum, drain pan and top plate galvanized steel. Evaporator Blower: Dynamically Balanced Three Speed Heavy Duty. 600 CFM rated capacity @ 24 amperes. Size: 6.75" High x 33.5" Wide x 16" Deep. Weight: 41 LBS. DC Current Draw: 24 Amperes @ 13.5 Volts Low Pressure Switch: Mounted in evaporator * Note: All RAC Systems Product Information and Specification Data Presented Herein Subject To Change Without Notice At Any Time. ABOUT RIFLED TUBE COIL TECHNOLOGY Rifled Air Conditioning Systems introduced enhanced rifled coil technology to the bus industry. The internal rifled grooving of our coils increase the surface area as much as 50% over that of smooth copper coils for a more efficient transfer of heat. As a result of the success of this industry improvement, our competitors have also begun to offer enhanced heat exchanger coils. Let the buyer beware as there are many different types of enchanced coils being offered. Some of these coils were even designed for home cooling and not for use in buses. In order to get the best results it is important that you specify the most effective coils for the bus industry = Rifled Tube Coils. Product Note: This Evaporator is one of the many components manufactured by RAC Systems. To complete a bus air conditioning system, with the goal of maximum performance and reliability, it is important to do so with vehicle size, passenger capacity, and climate conditions in mind. For initial help selecting a system, please use the A/C Wizard . For futher in depth information, please contact your local RAC Master Warehouse Distributor. These authorized installers can customize a system for you that offers the best combination of components (i.e., condensers & evaporators), compressors, and available engine mounting brackets to meet your needs. RAC can be contacted directly at 1-800-784-5627. | 
